Duct Fittings Production & Metal Processing Manufacturer From China
Recent Posts
How should ductwork clamps be installed
Release time:
Jan 11,2023
Installed on the welding plate, before installation, in order to determine the direction of the clamp, it is recommended to mark the fixed place first, then weld the welding, insert the lower part of the ductwork clamps body, and put the pipe to be fixed.
Installed on the welding plate, before installation, in order to determine the direction of the clamp, it is recommended to mark the fixed place first, then weld the welding, insert the lower part of the ductwork clamps body, and put the pipe to be fixed. Then put the other half of the ductwork clamps body and the cover plate, and tighten them with screws. Do not directly weld the bottom plate with ductwork clamps installed.
Installed on the ground guide rail, the guide rail can be welded on the foundation, or fixed with screws, then push the guide rail nut into the rail, and turn it 90 degrees, insert the lower half of the ductwork clamps into the nut, put the pipe to be fixed, and then put The upper half of the ductwork clamps body and the cover plate are fixed with screws. Stacking device, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the ductwork clamps, put the pipes to be fixed, and then put the upper half of the ductwork clamps, fixed with screws, through the anti-loosening cover Avoid it shifting. Then install the second ductwork clamps in the same way as above.
The installation of the bent pipe, when installing the bent pipe, should be directly fixed with ductwork clamps on the front and rear of the bent pipe. It is advocated that such support points should be of fixed orientation.
keywords
Contact Us
Tel: +86-311-85612775
WhatsApp: +86-15028109230
E-mail: info@ypmachinery.com
Address: 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang City,Hebei Province, China
Our Products
We produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding parts, and assemble products
Follow us