The working temperature range of china ductwork clamps
The development of many industries in life is inseparable from China ductwork clamps, and sometimes some inconspicuous factors can lead to a big gap. china ductwork clamps mounted on soldered plates.
The development of many industries in life is inseparable from China ductwork clamps, and sometimes some inconspicuous factors can lead to a big gap. china ductwork clamps mounted on soldered plates. Before assembly, in order to better determine the direction of the clamp, it is recommended to mark the fixed position, then weld, embed the lower part of china ductwork clamps, and place the pipes that need to be fixed. Then place the other half of the china ductwork clamps and the cover, and tighten them with screws. Do not directly solder the bottom plate where china ductwork clamps are installed.
During the installation process of the guide rail, the guide rail can be welded on the foundation or fixed with screws, then push the guide rail nut into the guide rail, rotate 90 degrees, embed the lower half of the china ductwork clamps into the nut, and then put the china ductwork clamps and Place the top half of the cover. During folding and assembly, the rails can be welded or fixed with screws. First install the upper and lower china ductwork clamps, place the tubes that need to be fixed, then place the upper half of the china ductwork clamps, fix it with screws, and prevent it from rotating through the anti-loosening cover. Then install the next china ductwork clamps in the same way as above.
We produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding parts, and assemble products