Duct Fittings Production & Metal Processing Manufacturer From China
Recent Posts
Installation knowledge of ductwork clamps from China manufacturer
Release time:
Jan 25,2022
ductwork clamps from China manufacturer are installed on the ground rail, the rail can be welded on the foundation, or fixed with screws, then push the rail nut into the rail, and turn it 90 degrees, insert the lower half of the ductwork clamps from China manufacturer into the nut, put Put the tube that needs to be fixed on, and then put the upper half of the tube and cover plate, and fix it with screws.
The ductwork clamps from China manufacturer are installed on the ground rail, the rail can be welded on the foundation, or fixed with screws, then push the rail nut into the rail, and turn it 90 degrees, insert the lower half of the ductwork clamps from China manufacturer into the nut, put Put the tube that needs to be fixed on, and then put the upper half of the tube and cover plate, and fix it with screws. Let's take a look at the installation knowledge of ductwork clamps from China manufacturer!
Before assembling on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld the welding, insert the lower part of the ductwork clamps from China manufacturer, and place the pipe to be fixed. . Then put the other half of the ductwork clamps from China manufacturer body and cover plate, and tighten with screws. Do not directly weld the bottom plate with ductwork clamps from China manufacturer installed.
Stacked assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the ductwork clamps from China manufacturer, put the pipe to be fixed, then put the upper half of the ductwork clamps from China manufacturer, and fix it with screws , which is prevented from turning by the anti-loosening cover. Then install two ductwork clamps from China manufacturer, the method is the same as above.
Assembly of the elbow, when assembling the elbow, it should be fixed with ductwork clamps from China manufacturer directly on the front and rear of the elbow. It is recommended that such support points should be fixed positions.
keywords
Previous Page:
Contact Us
Tel: +86-311-85612775
WhatsApp: +86-15028109230
E-mail: info@ypmachinery.com
Address: 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang City,Hebei Province, China
Our Products
We produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding parts, and assemble products
Follow us
