Duct Fittings Production & Metal Processing Manufacturer From China
Recent Posts
Storage, installation and use of Pressed ventilation elbow
Release time:
May 26,2022
Pressed ventilation elbows stored for a long time should be inspected regularly, and the exposed processing surfaces should be kept clean, remove dirt, and neatly store them in a ventilated and dry place indoors. It is strictly forbidden to store them in the open air. Always keep the Pressed ventilation elbow dry and ventilated, keep the device clean and tidy, and store it according to the accurate storage method.
1. Pressed ventilation elbows stored for a long time should be inspected regularly, and the exposed processing surfaces should be kept clean, remove dirt, and neatly store them in a ventilated and dry place indoors. It is strictly forbidden to store them in the open air. Always keep the Pressed ventilation elbow dry and ventilated, keep the device clean and tidy, and store it according to the accurate storage method.
2. During installation, the Pressed ventilation elbow can be directly installed on the pipeline according to the connection method, and installed according to the position of use. Under normal circumstances, it can be installed at any position of the pipeline, but it is necessary to facilitate the inspection of the operation. Note that the medium flow direction of the cut-off Pressed ventilation elbow should be upward from the vertical valve flap, and the Pressed ventilation elbow can only be installed horizontally. Pressed ventilation elbow should pay attention to the tightness during installation to prevent leakage and affect the normal operation of the pipeline.
3. When the ball valve, globe valve and gate valve of the Pressed ventilation elbow are used, they are only fully open or fully closed, and are not allowed to be used for flow regulation, so as to avoid erosion of the sealing surface and accelerated wear. There are reverse sealing devices in the gate valve and the upper threaded globe valve. The handwheel is turned to the uppermost position and tightened to prevent the medium from leaking from the packing.
keywords
:Next Page
Contact Us
Tel: +86-311-85612775
WhatsApp: +86-15028109230
E-mail: info@ypmachinery.com
Address: 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang City,Hebei Province, China
Our Products
We produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding parts, and assemble products
Follow us
