Maintenance of Pressed ventilation elbow products


Release time:

Apr 28,2023

Pressed ventilation elbow products are components that are often used in ventilation systems.

Maintenance of Pressed ventilation elbow products

Pressed ventilation elbow products are components that are often used in ventilation systems. Due to their relatively high frequency of use, it is particularly important to strengthen maintenance and maintenance. The following will give a detailed introduction to the maintenance of Pressed ventilation elbow products.

Cleaning and maintenance

(1) Regularly check the use of the ventilation system, and clean up the dirt such as grease and dust in time to prevent the system from being blocked due to accumulation.

(2) Use a special cleaning agent for cleaning. Avoid cleaning with hard objects, so as not to damage the inner surface of the pipe, and may also cause irreparable damage to the sealing ring.

(3) Pay attention to the timing of cleaning. For common ventilation systems, it should be cleaned at least once a year; for high-efficiency filter systems, it should be cleaned frequently to increase its service life.

Pressed ventilation elbow products

Maintenance

(1) Pay attention to the parts. Before opening the ventilation system, check whether the connection of the ventilation elbow is in good condition, especially when cleaning, it is necessary to unplug the bracket and sealing ring of the interface, and make sure it is intact and connected correctly when using it.

(2) Avoid vibration. Due to the special connection method of Pressed ventilation elbow products, it is necessary to ensure the safety and stability of the pipeline during use, and avoid the connection parts falling off due to valve vibration, machine vibration, etc.

(3) Check the fasteners regularly. Keep the Pressed ventilation elbow products close to other pipelines, and set up a regular inspection system to prevent loose fasteners from affecting the quality of the connection.

storage and maintenance

(1) Pay attention to the storage location. When storing the ventilation elbow, choose a relatively dry and well-ventilated place to avoid moisture and contamination.

(2) Avoid stress. Try to keep the storage state free from external impact or extrusion, so that it will not be deformed or damaged during storage.

The above is some basic knowledge for the maintenance of Pressed ventilation elbow products. If we follow these recommendations, let the ventilation system maintain its working efficiency and effectiveness for a long time.

keywords

Contact Us

Tel: +86-311-85612775
WhatsApp: +86-15028109230
E-mail: info@ypmachinery.com
Address: 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang City,Hebei Province, China

Our Products

We  produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding  parts, and assemble products

Follow us

Mobile site

Copyright © 2022 Hebei Yunpeng Machinery Co., Ltd.