Duct Fittings Production & Metal Processing Manufacturer From China
Recent Posts
Installer for ductwork clamps
Release time:
Mar 28,2023
Then put the other half of the ductwork clamps body and the cover plate, and tighten them with screws. Do not directly weld the bottom plate with ductwork clamps installed.

Assembled on the welding plate, before assembling, in order to better determine the direction of the clamp, it is recommended to mark the fixing place first, then weld the welding, insert the lower part of the ductwork clamps body, and put the pipe to be fixed. Then put the other half of the ductwork clamps body and the cover plate, and tighten them with screws. Do not directly weld the bottom plate with ductwork clamps installed.
Installed on the ground guide rail, the guide rail can be welded on the foundation or fixed with screws, then push the guide rail nut into the rail and turn it 90 degrees, insert the lower half of the ductwork clamps into the nut, put the pipe to be fixed, and then put The upper half of the ductwork clamps body and the cover plate are fixed with screws.
Stacked assembly, the guide rail can be welded on the foundation, or fixed with screws, first install the upper and lower half of the ductwork clamps, put the pipe to be fixed and then put the upper half of the ductwork clamps, fixed with screws, through the anti-loose cover prevent it from turning. Then install the second ductwork clamps in the same way as above.
For the assembly of ductwork clamps elbow, when assembling the elbow, it should be directly fixed with Caster ductwork clamps at the front and rear of the elbow. It is recommended that such support points should be in fixed positions.
keywords
Previous Page:
Contact Us
Tel: +86-311-85612775
WhatsApp: +86-15028109230
E-mail: info@ypmachinery.com
Address: 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang City,Hebei Province, China
Our Products
We produce all kinds of metal parts include machine parts, metal stamping, deep drawn, sheet fabrication, welding parts, and assemble products
Follow us
