+86-311-85612775

+86-311-85329078

info@ypmachinery.com

 2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang

City,Hebei Province, China

 

Hebei Yunpeng Machinery is a leading enterprise

whose metal parts and duct fittings production.

CONTACT US

COPYRIGHT © 2018 Hebei Yunpeng Machinery Co., Ltd.
 
>
>
>
The deformation operation method of quality pressed bend
Company news
Industry news
web is updating and upgrading
Exhibition
Exhibition

The deformation operation method of quality pressed bend

quality pressed bend is a pipe fitting that changes the direction of the pipe. According to the angle, there are three commonly used ones: 45° and 90° and 180°. According to the needs of the project, it also includes other abnormal angle elbows such as 60°. So how are the quality pressed bends of these angles deformed?

quality pressed bend

The deformation operation method of quality pressed bend is as follows:

1. Flanged refers to the pipe fittings with the end of the pipe protruding to the inside or outside, forming a bulge or groove in the circumferential direction of the pipe;

2. Turn straight pipes into bends with different radii of curvature, such as quality pressed bend, bends, etc.;

3. The quality pressed bend makes the wall thickness change along the length of the pipe, so that the quality pressed bend changes the wall thickness of the pipe;

4. Change the section of the pipe fittings, according to the requirements, change the circular section into a square, oval, polygon and other quality pressed bend.