There is an inner lining at the nozzle of the stainless steel pressed bend. A part of the inner lining is located in the nozzle and is fixedly connected with the inner wall of the wide mouth. The other part of the inner lining is located outside the nozzle. The inner lining of the product located outside the nozzle is provided with Cut incision. When the stainless steel pressed bend is connected with the stainless steel pipe, it is easy to be butt-installed, can eliminate the tension generated by the pipe connection, has strong deformation resistance, and after welding, the connection will not be deformed after long-term use, and the installation and decoration effect is good.

The stainless steel pressed bend involves the field of architectural decoration, and its technical points are: including the pressed bend body, the pressed bend body of the product includes a curved curved section and a straight section connected at both ends of the curved section respectively, and also includes an arc-shaped anti-bending part. , the two ends of the curved section of the product are connected by the anti-bending part, and the two form a hollow. Through the setting of the anti-bending portion, the bending resistance of the pressed bend body is enhanced, thereby also increasing the service life of the pressed bend body.