2-201,Fangda Tech Park ,No.266 Tianshan Street, Shijiazhuang
City,Hebei Province, China
Hebei Yunpeng Machinery is a leading enterprise
whose metal parts and duct fittings production.
Hebei Yunpeng Machinery
Installation knowledge of ductwork clamps from China manufacturer ductwork clamps from China manufacturer are installed on the ground rail, the rail can be welded on the foundation, or fixed with screws, then push the rail nut into the rail, and turn it 90 degrees, insert the lower half of the ductwork clamps from China manufacturer into the nut, put Put the tube that needs to be fixed on, and then put the upper half of the tube and cover plate, and fix it with screws.
3 days ago
ductwork blast gate damper from China manufacturer introduces a damper device capable of adjusting the torque of both shafts A damper device capable of adjusting the torque of two shafts, which is good in assemblability and capable of suppressing manufacturing costs. The damper device is constituted by the following steps: connecting a small-diameter chamber and a large-diameter chamber into one body; A bottom is provided on one side of the chamber, an opening is provided on one side of the large-diameter chamber, and a sleeve with a wall surface on the side of the large-diameter chamber orthogonal to the axis is formed on the junction of these two chambers;
ductwork blast gate damper from China manufacturer introduces the little knowledge of damper device A damper device is provided that the top of a resistance unit erected centrally before the damper device is adjacent to a support base is subjected to a screw segment of a corresponding part passing through it to adjust the erection of front and rear inclinations, and to adjust the middle of the resistance unit. The flywheel and the hydraulic oil toggle wheel, which are arranged on both sides of the same axis of the contact wheel of the segment, are formed with multiple swirling blades.
Cheapest ductwork blast gate damper products introduce the structure of sliding door damper products The sliding door damper structure includes a damper body and a limiting device. The limiting device includes a connecting seat and a limiting pin. The damper body includes a base plate and a shell arranged on the base plate. One end of the shell is provided There is a guide groove, and a damping device is arranged in the casing.